The following screens can be used to check on the VPN status, now that the python app has completed all the steps and built both ends of the VPN Tunnel - AWS and Meraki !
In my case the EC2 instance has an IP of 172.31.30.146.
AWS CGW configured:
AWS VPN Configured:
Meraki VPN Enabled:
Trace from Meraki LAN to EC2 instance - via VPN tunnel (1 hop):
And as promised - here is the completed APP ready to run (NOTE you will need to update the variables at the top that have [REQUIRED] next to them.
Hope this blog series has been of use - and any questions leave in the box below or send me an email !
No comments:
Post a Comment